How To: Assembling and Framing Multiple Puzzles Together

multipuzzles-1

I know there are probably other puzzlers like me out there who have a bit of prejudice against any puzzle under 1000 pieces. I will occasionally get a 500 piece puzzle if I adore the image, but the thing is, a 500 piecer usually is done in the span of one evening, and it hardly seems worth the effort, especially if it’s a puzzle that has to be shipped from overseas. Plus, the resultant finished puzzle is small and not particularly impressive.

But it can be rather fun if you have more than one puzzle that look good together, such as Gibsons’s mutli-puzzles sets. The puzzle above is “The Postman’s Rounds”, a set of four 500 piece puzzles in one box. You can mix them all together, if you like, to make a fairly challenging 2000 piece puzzle. But even if you do them separately, mounting them together makes a more interesting and impressive display.  (See my post here about doing temporary mounting for puzzles).

You can also ‘double mount’ 1000 piece puzzles. Over Christmas I did the 2014 Wasgij Christmas puzzle. That puzzle came in a box with the box lid image and the wasgij image as two separate 1000 piece puzzles. Quite by mistake, I ended up doing the box lid image first and then of course I had to do the wasgij image too. It turns out they’re more interested mounted together.

multipuzzles-2

(I blurred the wasgij image because I dislike having those spoiled for me.)

It enhances the wasgij joke, I think, to be able to see both the box image and the wasgij image together. In fact, now I finally have a use for those wagsij boxed sets of lid images. I think I’ll pick up some of the early ones and do them with the original wasgij puzzles I already have and then mount the lid and the wasgij images together.

It can also look quite nice to frame larger puzzles together too, particularly when they’re designed for that purpose. Below are two Epoch puzzles, 2000 pieces each. (This is not my image, but one I got off the internet.)

Crane and Turtle togetherb

JJ

3 thoughts on “How To: Assembling and Framing Multiple Puzzles Together

Add yours

  1. I don’t see a particular section where this would be most appropriate, so I reckon I’ll just ask it here – do you have any reviews on the best glues to use? More important for what I’m interested in right now – can you glue a puzzle in sections? For instance, I’m working that Tomax puzzle of the elephant that was reviewed here (and which I agree with in terms of poor quality). I have the elephant itself almost finished, but I’m so burned out on the difficulty of this one that I’m going to put it away for a while – it’s either that or throw the darn thing out, frustrating as it has become.

    But I’m wondering – can I glue the elephant into a single piece, and then glue it to the remainder of the puzzle later, when it is fully assembled? Or is that not possible?

    1. Hi, Robin — I’ve only glued one puzzle. I think I used Sunsout glue. That one worked fine. Maybe others have tried different brands.

      I would definitely NOT recommend gluing a partial puzzle like ‘just the elephant’. I imagine that when glued pieces dry they might tighten or warp slightly and that would make it very hard to the ‘continue’ the puzzle. I’d recommend finishing the entire thing before you glue it. Good luck!

  2. I have a 32,000-piece puzzle, and it’s currently in 8 separate sections that I have not glued yet. In total, it will be about 6′ tall and 16′ long. I have foam board and spray adhesive, but I’m lacking a plan for how to hang it on the wall since it will be heavy in weight, and I don’t want to hammer a ton of nails in the wall. I also don’t want to glue too soon in case the glue along the perimeter will prohibit the next section from being connected. Any ideas on the best way to glue / mount / hang this beast of a puzzle? Thank you.

Leave a Reply to Robin Nelsen Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Blog at WordPress.com.

Up ↑

%d bloggers like this: